Error 1402 could not open key

Error 1402. Could not open key: - Microsoft Communit

  1. I looked in my registry for the key but didn't find it. When I searched the registry for the key by removing the last part (first MSFS - then removed OptionalComponents and finally Run) and that is when the search got results. But, every hit was on the Key (right side) of the registry
  2. istartor, UAC turned off. There was a bad uninstall of the product, had to run Windows Installer Cleanup because was receiving messag
  3. BTW, after several years have passed, many 'new' versions were released, the setup routines still do a really miserable job... We routinely experience this (and similar) problems for various reasons

HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-<numbers>\Components key has incorrect permissions. Answer Solution 1: On the Windows Start menu, enter CMD to the search box Could not open key: HKEY_LOCAL_MACHINE32\Software\Classes\Interface\{BEF6E003-A874-101A-8BBA-00AA00300CAB}\ProxyStubClsid. Verify that you have sufficient access to that key, or contact your support personnel Error1402.CouldnotopenkeyUNKNOWN\\Components\\DA42BC89BF25F5BD0AF18C3B9B1A1EE8_error 1402 could not open key Note: If you receive another error, it indicates that another registry key may be affected. In this case, repeat this procedure for the new registry entry. It is not uncommon for several registry keys to be affected by this issue Applies To : Product(s): MicroStation : Version(s): : Environment: Windows 7 32 bit, Windows 7 64 bit, Windows Vista 32 bit, Windows Vista 64 bit, Windows XP 32 bit, Windows XP 64 bi

Error 1402: could not open key: - Microsoft Communit

  1. I'll be glad to.My Anti-Virus Program is the 2008 Shield Deluxe made by PCSecurity Shield.I have real time protection enabled which includes:A running file and mail virus program currently turned.
  2. istrator
  3. Open the following folder: C:\Users\All Users\Microsoft\Office\Data\ If you are running Office 2007, right-click Opa12.dat or if you are running Office 2003, right-click Data.dat , and then click Properties

Could Not Open Key' Author: Luis Fernandes May 31, 2019 20:02 Updated Overvie The above command will open another command prompt running under 'Local System' On the new command prompt, open Registry Editor by typing regedit and hitting the enter key. In registry editor, navigate to the following hive HKLM\Software\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Component Adobe does not support multiple versions of Acrobat or Reader on the same machine. Because Acrobat and Reader work with many products, multiple versions simultaneously installed can lead to software conflicts and errors. In addition, Adobe does not recommend installing both Acrobat and Reader on the. In order to resolve this error, you will need to repair permissions to some registry keys: Open the registry editor (Start > Run > type regedit) Navigate to the following parent container: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components. The 'S-1-5-18' key may be different on your computer Solved: What does the above statement mean as I can not load an update to Acrobate X

Error 1402 during uninstallation (Could not open key

  1. Hello, When I try to install LabView (v7.1 or v8.0) I get the following error
  2. However the issue is that ALL owner rights had been removed from 3 keys each with 4 sub keys entries in the registry, so nothing could access these keys in any way. If you don't add an owner first then no matter what you try you will not be able to change permissions
  3. If the permissions are not set properly, or if your User Group does not have the correct permissions you will need to correct this issue. Once you have corrected the permissions, close Registry Editor and try to install Snagit
  4. Find solutions to install errors 1401, 1402, 1404, and 1406, which may occur when you install an Adobe Creative Suite 4 or Adobe Creative Suite 5 application

Install Error 1402 (Could not open key: UNKNOWN\Components

sufficient access to that key, or contact your support personnel.* I changed the permissions of the registry keys MSComDlg.CommonDialog.1 and MSComDlg.CommonDialog but gave me no results. Thanks for any help, I have an XP SP The Apache OpenOffice User Forum is an user to user help and discussion forum for exchanging information and tips with other users of Apache OpenOffice, the open source office suite Quickbook solution not quite the same problem. The Microsoft support tech said the register key has been modified by the Quicken uninstall process somehow and will not let allow a new install to complete. Thanks for input anyway Expand the Software key, and repeat steps 3, 4 for Classes Expand the Classes key, and repeat steps 3, 4 for Installer If you have made any changes in steps 1 through 7, skip to step 10. If you did not make any changes, continue with step 9. Open the Classes key, and click on Installer . In the menu, click Security, Permissions Thanks. I moved on though. I got tired of trying to deal with it and just got a refund. Thankfully it was for work, so I was able to get a copy of Parallel Desktop, Windows and got DVD Architect

Pinal Dave is a SQL Server Performance Tuning Expert and an independent consultant. He has authored 12 SQL Server database books, 33 Pluralsight courses and has written over 5100 articles on the database technology on his blog at a https://blog.sqlauthority.com. Along with 17+ years of hands-on experience, he holds a Masters of Science degree and a number of database certifications IMAGINiT Technologies Support Blog Solution Center Available M-F 8AM-8PM ET Toll Free: 888.528.476 If not add the administrator group. If that is your only issue, I would consider it a one off - with your previous case, it looks like you have a possible virus/malware issue. brent_caske error:1402 could not open key... Advanced search: Message boards: Questions and problems: error:1402 could not open key... Message board moderation. To post messages, you must log in. Author Message; stuart patterson. Send message Joined: 22 Oct 08 Posts: 1: Message 20925 - Posted.

How to fix Error 1402. Could not open key UNKNOWNComponents. System error 5 - While installing Service Pack 3 for SQL Server, we may get this error about UNKNOWN. During the installation process, a dialog box appears with the message could not open key Note that the key may differ from the one shown here. Solution. This issue is caused by insufficient or incorrect permissions on the registry key or patent container for the registry key that is references in the message

Error 1402. Could not open HKEY_LOCAL_MACHINE32 when ..

Error 1402. Could not open key UNKNOWN\\Components ..

Hi there. Today EDMarketConnector wouldn't launch. So, I uninstalled it with the intent to reinstall it. When I try to reinstall it, I receive the following error: Could not open key: UNKNOWN\\C.. Hi try to launch the setup.exe with administrator rights if not help full try to update the system. if the dll is an 32 bit dll and trying to register in 64 bit registry then certenly you will get an issue You will be able to verify the issue has been resolved when you are not presented with the error: Registry Editor could not set owner on the key currently selected, or some of its subkeys. when completing steps h and i Verify that you have sufficient access to that key, or contact your support personnel. No se pudo abrir la llave: UNKNOWN\Components\DA42B.... Verifica que tengas permisos suficientes para esta llave

Error 1402 or 1406 during installation Search Autodesk

  1. Could not open key Installing vCenter Server 4.1 on Windows server fails Note: This issue may also occur with other VMware products, such as VMware Workstation
  2. Techyv is one of the leading solution providers covering different aspects of Computers and Information Technology. We have a hardworking team of professionals in different areas that can provide you with guaranteed solutions to a blend of your problems
  3. I spent an hour resetting permissions on various keys in regedit, but everytime i fix one, another one is shown as not being accessible due to permissions. I feel like this is going to be an endless effort to reset permissions on all those keys in the registry
  4. Okay, I got some assistance from another developer and the problem turned out to be that the user account used to install the software was a Domain User account which had access to create registry keys but not the permissions to delete them during the uninstall
  5. Could not open key: UNKNOWN...' So, after finding and fixing about 10 or so of the offending errors the long way, I decided to go to the top level and add my ID with full permissions (didn't try to replace any ownerships) and saved about 89,345 hours of time..

Error 1402. Could not open key - MicroStation Wiki ..

  1. e was in hklm\software\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components), you will notice that there are subkeys underneath that you don't have any permission to
  2. Could not open Key'HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\.....\A3CD4BF9-EC17 -47A4-833C-50A324D6FF35}. Verify that you have sufficient access to that key, or contact your support personnel Local fi
  3. IRIS Accountancy Suite. With an unbeaten compliance track record, open connectivity and integrated document sharing, the IRIS Accountancy Suite provides the most extensive portfolio of integrated and automated solutions on the market for any thriving practice

Brother's website says that program is for Windows 7 and 8.1, and they have a new one that is for Windows 10. Also there is a version for Windows 10 of yours, it says 10.21 I have Norton anti virus but no firewall. That is the only anti-virus protection I run. I use email through my web host SWB so I don't have a firewall About The Author: Phil Hart has been a Microsoft Community Contributor since 2010. With a current point score over 100,000, they've contributed more than 3000 answers in the Microsoft Support forums and have created almost 200 new help articles in the Technet Wiki Error1402.Could not open key: UNKNOWN\AcroExch.XDFDoc\shell\Print\command

Symantec Endpoint Protection client fails to install and rolls back. During the installation you receive the above installer information. When you click on OK What happens when you delete the registry key or all the keys associated with QT? This Microsoft article though claiming not to be for XP or 2000, has something interesting to say under Cause Symantec cannot open key Asked By Cathy C Sweatt 0 points N/A Posted on - 12/29/2013 Hi Same problem here w/ Xcelsius. Had to actually give myself, even though I was in the local admins group of windows, ownership and full control on the parent keys of the two keys that the install was breaking on

Error 1402: Could not open key: key. System error: error when updating TurboTax if: You're not logged in as an administrator. An antivirus, anti-malware Solved: Attempting to install Design Suite Ultimate 2013 on a Windows XP Pro 32-bit system and right after entering the s/n and product key an

Error 1402 I Cannot Open A Needed Registry Key - Windows

Could not open key: UNKNOWN\Components\ Note that after the Components\ there will be a registry key and subkey listed, which will appear as a long string of characters signifying the GUID of the installation component you guessed right - i know how i'd do it for a key that's there, but i can't take ownership/gain access to a key that does NOT exist. continuing - the way i got quicktime/iTunes installed was by breaking their EXE installation packages into pieces. but this one doesn't break - it says it's packed with MS visual C 6.0 & i don't have the tools to split it Ensure the administrators group has Full Control over the key and check the box for 'Replace all child object permissions with inheritable permissions from this object' Choose OK. You may get a message stating that not all keys could be modified. Choose OK on that message Thanks for the feedback, but I had already resolved the problem. The registry entry was indeed corrupted, so I removed the Office entry from the registry, ran the registry fix once again, rebooted, added the permissions successfully and reinstalled office XP, and successfully ran my patches Could not open key: UNKNOWN...' problem which is becoming prevalent in online forum postings. Please use this information at your own discretion. A Quick Overvie

Deal with Windows Installer Error 1402 like a boss - www

The following error message may be displayed on your computer when you try to perform Microsoft Office XP installation. Error 1402. Could not open key: key_name. Citrix is not responsible for and does not endorse or accept any responsibility for the contents or your use of these third party Web sites. Citrix is providing these links to you only as a convenience, and the inclusion of any link does not imply endorsement by Citrix of the linked Web site

Could not open key: HKEY_LOCAL_MACHINES\Software\Microsoft\Windows\He TechnoFeeb said: ↑ Have you been able to add the new user Everyone to permissions for the key and set full permissions for it The key should now inherit the correct permissions. 7. Repeat steps 4-6 on the child keys under this container for any additional keys referenced in the installer warnings. Note: These steps may need to be repeated for multiple keys (10-15 unique keys has been observed) referenced by Agent installer but eventually the installation will complete

Office installation Error 1401, 1402 or 1406 - Office

Could not open key: HKEY_LOCAL_MACHINE\Software\Classes\AcroExch.Sequence\DefaultIcon. Verify that you have sufficient access to that key or contact your support personnel. I have no choice but to click OK, and then the installation rolls back and notifies me that nothing has been modified on my system Hi, I have a Compaq Presario C500 Laptop with Windows Vista installed. For the past year, I've been trying to upgrade from Adobe Reader version 8 to either a - 474035 Could not open key: HKEY LOCALMACHINE\Software\classes\.cdda\OpenWithProgids. Verify that you have sufficient accessto that key, or contact your support personnel. I have no idea what that means and i have no idea what to do...i jst bought an ipod nano, i used to have an ipod shuffle and the software used to work fine Tweaking.com - Windows Repair is a tool designed help fix a large majority of known Windows problems including; registry errors, file permissions, issues with Internet Explorer, Windows Updates, Windows Firewall and more. Download Tweaking.com - Windows Repair Tool and run the Tweaking.com - Windows Repair Tool from Safe Mode With Networking and from Repairs tab click Open Repairs button Whilst trying to load Adobe Reader an 'error 1402 could not open key' message comes up, followed by description of key -

While the computer is restarting, press and hold down the CTRL key until the Windows 98 Startup menu appears. From the menu, select the Command prompt only option. After the system loads to the command prompt, type scanreg /fix without the quotes and press the Enter key Open regedit (start-run- type in regedit and click OK) and navigate to the key, then do what suggested in the link Edited February 7, 2008 by EPR35 Share this pos Keep in mind a forum censor may temporarily automatically hold up your post, if you do not see your post, do not post again, it will be dealt with by a moderator within a reasonable time. Authors of multiple copies of same post may be dealt with by moderators within their discrete judgment at the time which may result in warning or infraction points, depending on severity as adjudged by the. Hi Assennatog, the problem could be in the registry keys that are still present even if you completely uninstalled all the NI SW. So, after having uninstalled every NI apllication, try to execute the keys deleting proccess, by using MSIBlast, in the way it's explained in the attached doc. Ciao

It indicates that the user installing does not have sufficient permissions to access a vital Registry Key. If the user is an Administrator and still gets this error, then the operating system has failed to give the Administrative User sufficient permissions Verify that you have sufficient access to that key, or contact your support personnel. Action ended 1:17:06: InstallFinalize. Return value 3. Note: GUID may vary depending on environment. Cause This happens if the required registry keys do not have appropriate permissions. Solutio Currently only one user is having this problem as far as I know. It used to happen on a few end-user machines as well, but the workaround reported was that they had to use an old installer and never upgrade to the latest one Once you follow these steps there should be any errors about not being able to update permissions on the child keys. Click on 'Ok' and exit the registry editor. Run the CA ARCserve RHA Installation and it should work successfully now

What does BACKUP WITH NAME Command do? - Interview

The message is Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\InternetExplorer\main\FeatureControl\FEATURE_BROWSER_EMULATION. Please Verify that you have sufficient access to that key or cont.. Error Message: Error 1402 Could not open key: UNKNOWN\Components\BR208484858567440\2848408FC34049A99B00484E. System error 5 (access.. I'm getting ERROR 1402: Could not open key: <*> When trying to download Quick Books!!!? Join Yahoo Answers and get 100 points today. Join. Trending Questions. Trending Questions. What if covid-19 Doesn't exist? 12 answers. Do you use Linux operating system? 11 answers Could not open key: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVe By ing.romi · 13 years ago Every time that I want to install a SW, I have this error

If you need any further information, do not hesitate to contact our Technical Support Team or check out our Knowledge Base below Home → Kurzweil 1000 (K1000) → Kurzweil 1000: Troubleshooting → Error: 1402 Could not open key, during install. 2.11. Error: 1402 Could not open key, during install. Last updated: June 2017. Problem The following error are encountered when launching a Pro Client session on a Windows computer: Error 1402: Could not open key [key name] . Error 1406: - 173616

How To Fix The Microsoft Office 1402 Error CodeError 1402 when installing Crystal Reports for VisualEnable Cryptographic Service in Windows 7

Verify that you have sufficient access to that key, or contact your support personnel. To solve this issue, please follow the steps listed below. Because these steps will edit your registry, we highly recommend that you back up your computer, or at least the registry, before taking the proceeding. 1. Open Regedi I have tried your suggestion numerous times and it has not resolved the issue. I also tried a total uninstall, removing all traces of the game, and upon re-installing the problem persists. This is now occurring on a 100% freshly installed Vanilla game. All the other Skyrim tools and the game itself are working without incident ~/.m/m/bin » ./simulate./model/humanoid.xml (ppo_latest) 20:45:08 MuJoCo Pro library version 1.50 ERROR: Could not open activation key file mjkey.txt Press Enter.

Autodesk产品安装 - 错误 1402 无法打开主键UNKNOWN解决方法-Inventor-汇识学院World Dance Co格式工厂怎么合并视频和音频_影视制作教程_三联

Error 1402.Could not open key: UNKNOW\Installer\Patches\20E5362992C4F8AA28B78598C323D\SourceList\Media. Verify that you have sufficient access to that key, or contact. Welcome to Tech Support Guy! Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations. If you're not already familiar with forums, watch our Welcome Guide to get started. Join over 807,865 other people just like you After backing up the registry, load REGEDIT and browse to the key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components. If you do not know how to do this then you probably should go no further and seek help from someone who does know, and ask them to follow the instructions below xEdit/DynDOLOD use the game registry keys to know where the game is installed. Run the games launcher once to generate/update the registry keys. Make sure to start DynDOLOD/TexGen in the correct game mode.It defaults to TES5 (Skyrim). If you want to to use the tools with SSE (Skryim SE) add the -sse command line parameter to the shortcut as explained in the manual

vs2015 重装失败 修复失败 error1402 could not open key: UNKNOW\Components 注册表:无法打开XXX由于某个错误无法打开该密钥右键权限高级更改所有者选择DESKTOP-MB71SL6\Administrators确定后点添加增加权限:应用确定.. Could not open key: UNKNOWN\Components\ Note that after the \Components\ , there will be a registry key and subkey listed, which will appear as a long string of characters signifying the GUID of the installation component I should mention that not even a week ago, this computer had adobe installed and was working fine. Then suddenly it wasn't. My other attempt at a fix was to try and go into safe mode to do a.

Issue has been resolved in Service Pack 3 for Crystal Reports for Visual Studio 2010 Keywords cr4vs2010 2010 vs2010 crforvs 13 NET2010 deployment install GPO click once , KBA , BI-DEV-NET , BI Software Development Kits (SDKs) - .NET or Other , Proble Could not open key: UNKNOWN...' problem which All registry keys listed outline below which has not been properly documented as we have done so here. Type a name for the find more but I'm not sure exactly how much to take out When attempting to install an msi you receive one of the following error messages: Unable to open sub key or Error 1402.Could not open ke.. IMAGINiT Technologies Support Blog Solution Center Available M-F 8AM-8PM ET Toll Free: 888.528.4765. IMAGINiT; Autodesk installation error: Could not open Key. It is not uncommon for several registry keys to be affected by this issue It is not a BOINC error, but a Windows one. It's a problem with the Windows registry permissions that got corrupted. See this thread at Microsoft Answers , or this write-up for possible fixes

Good Day,I have not been able to either upgrade or re-install AVG 2015 (avg_free_stb_all_5856p1_177) since being prompted for the latest update. T.. Setup cannot open the registry key HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run\OptionalComponents\MSFS. Verify that you have sufficient permissions to access the registry or contact Microsoft Product Support Services (PSS) for assistance When you're using foreign key, your order of columns should be same for insertion. For example, if you're adding (userid, password) in table1 from table2 then from table2 order should be same (userid, password) and not like (password,userid) where userid is foreign key in table2 of table1

  • Match 3 games free download.
  • Principe harry é filho de.
  • Fantasy game yahoo.
  • Molduras de casamento com frases.
  • Cartas de pessoas que se suicidaram.
  • Farda de gala da aeronautica.
  • Victoria's secret fashion show 2017 sbt.
  • Barolo vinho uva.
  • Vacinas virais e bacterianas.
  • Virose em salvador sintomas.
  • Erin brockovich resumo ambiental.
  • Monrovia port.
  • Os waltons dublado.
  • Tradutor de audio online.
  • Principais campos de concentração na alemanha.
  • Conta xbox live gold gratis.
  • Qual a influência do marketing nas necessidades e nos desejos das pessoas?.
  • Laura marano e ross lynch 2017.
  • Historias engraçadas reais.
  • Especialista em tatuar pele negra.
  • Mosca varejeira onde vivem.
  • Maze runner 2 assistir online.
  • Videos de doenças nojentas.
  • Stuttgart alemanha.
  • O homem mais rico do brasil 2018.
  • Mitologia romana resumo.
  • Nivel 180 94.
  • Dança de salão bolero.
  • Tatuagem de anjo feminina pequena.
  • Mão vetor png.
  • Ben carson pdf.
  • Juquehy distancia sp.
  • Charlize theron filha.
  • Dibujos de pueblos para colorear.
  • Como saber se estou gravida apertando a barriga.
  • Chip da beleza curitiba.
  • Frases para irmã mais nova bebe.
  • Varicocele grading.
  • Daifuku mochi receita.
  • Defeitos de tecelagem.
  • Casas pobres nos estados unidos.